Skip to content

More yield per asset. Less work per MWp.

Monitoring and Operations for solar and storage, in one platform.

Book a demoExplore the platform

30 minutes, on your own sites.

What Alpha does

One platform for solar and storage, from alarm to proof.

Alpha reads your inverters, batteries and sensors, finds what underperforms and turns every fault into a work order. Every month it shows what was found, resolved and saved, in euros.

Integrations

Through the vendor cloud, or directly over Modbus TCP and SunSpec.

01 — See

From your whole fleet to the one string that's off.

The Alpha monitoring map, with the navigation on the left, 42 sites across the Netherlands, Belgium, Germany and France coloured by status, the sites that need attention on the right, and a conversation in which Alpha AI answers where the most critical faults are and what is still open.
Solar PVEvery string, every inverter.Battery storageEvery rack, every cycle.

From raw data to proof in euros.

  1. Connect. FusionSolar, SMA, EMS, satellite data and pyranometers meet in one data model.
  2. Configure. Alpha reads your drawings and builds the park configuration. You review it.
  3. Monitor. Dashboards you put together yourself, from fleet down to string.
  4. Store. Configure and monitor batteries in the same platform, down to the rack.
  5. Ask. Ask Alpha AI about your fleet and get one answer, with the evidence.
  6. Resolve. The alarm becomes a work order, and the technician closes with a field report.
  7. Prove. The monthly report is ready as a PDF: what it delivered and what it saved.

Monitoring for PV

From drawing to every string, in one view.

Alpha proposes the park configuration from its drawings, shows what each park delivers against what it should deliver and flags what is off.

See Monitoring →
1.1

Configuration with AI

Alpha reads drawings and datasheets and fills in the park configuration. You check the result.

A PV park's configuration in Alpha: grid connection, field, grid meter and inverters

Sample data

How it works

  1. 01Upload the drawings and datasheets; Alpha reads out inverters, strings and MPPTs.
  2. 02Every value has the passage from the document next to it.
  3. 03You approve; only then does it become the configuration.

Ask Alpha AI

“Which strings hang off inverter 3 at North park?”

What you get

  • Park configuration down to the string
  • Source per value
  • Checked by a person
See Monitoring →
1.2

Dashboards and reports

Dashboards per portfolio, park or inverter, also as a TV view. Monthly reports per customer in your own branding.

A park's dashboard in Alpha: photo, key figures, power and irradiance, production and inverter performance

Sample data

How it works

  1. 01Standard dashboards per portfolio, park and inverter.
  2. 02A TV view for the control room.
  3. 03Monthly reports per customer in your own branding.

Ask Alpha AI

“How did North park perform last month against plan?”

What you get

  • Dashboards per level
  • TV view
  • Branded monthly report
See Monitoring →
1.3

Digital Twin

Alpha works out what each park should have delivered and sets it next to the measurement.

Predicted, expected and measured yield per month in Alpha

Sample data

How it works

  1. 01Expected yield per park from irradiance and configuration.
  2. 02Measured against expected, per day and per month.
  3. 03The gap in MWh and in euros, with the largest cause.

Ask Alpha AI

“How many MWh did North park fall short of expectation this month?”

What you get

  • Expected against measured
  • Loss per cause
  • Gap in euros
See Monitoring →
1.4

Smart alarms

Rules for PV with three levels and exceptions per time window. Alarm quality shows where the noise is.

The alarm rules for PV in Alpha

Sample data

How it works

  1. 01A rule per situation: string below expectation, inverter offline, communication lost.
  2. 02Three levels and exceptions per time window, so the night does not alarm.
  3. 03Alarm quality per rule: what was false and what was real.

Ask Alpha AI

“Which of last night's alarms were false?”

What you get

  • Rules with three levels
  • Exceptions per time window
  • Alarm quality
See Monitoring →

02 — Batteries

Every rack, every cycle, up to the warranty.

Alpha monitors batteries down to the rack, calculates their health itself and keeps warranty, RMA and the monthly report together.

See battery storage →
2.1

Rack and cell in view

Per container and rack the state of charge, the warmest cell and the voltage spread, every day.

A battery in Alpha with the PCS status and the warmest cell per rack

Sample data

How it works

  1. 01Every PCS with its status, power and limitation.
  2. 02Per rack the highest and lowest cell in voltage and temperature.
  3. 03A rack that drifts stands out before it becomes a fault.

Ask Alpha AI

“Which rack has the largest voltage spread right now?”

What you get

  • PCS status
  • Cell extremes per rack
  • Daily overview
See battery storage →
2.2

SoH next to the BMS

Alpha calculates the state of health itself and sets it next to what the BMS reports.

Battery health in Alpha: Alpha's SoH next to the BMS's

Sample data

How it works

  1. 01SoH from full cycles and anchors, with a range.
  2. 02The difference with the BMS and the decline per year.
  3. 03Round-trip efficiency and what SoC drift costs per year.

Ask Alpha AI

“Does the SoH of BESS South differ from what the BMS says?”

What you get

  • Alpha SoH against BMS
  • Decline per year
  • Round-trip efficiency
See battery storage →
2.3

Warranty and RMA

Warranties sit next to what the battery actually achieves. A faulty part follows its RMA to the work order.

Warranties with guaranteed and achieved values, with the RMAs per part on top

Sample data

How it works

  1. 01Warranty terms per battery, also read from the document.
  2. 02An RMA per part and serial number, with status and days open.
  3. 03The RMA links to the work order that replaces the part.

Ask Alpha AI

“Which RMAs have been open for more than 30 days?”

What you get

  • Warranty file
  • RMA per part
  • Link to the work order
See battery storage →
2.4

Battery alarms

Rules for batteries next to those for PV: safety, cell balance, charging behaviour and availability.

The alarm rules for PV and batteries in Alpha

Sample data

How it works

  1. 01Safety reports from the BMS: fire, gas, insulation, emergency stop.
  2. 02Cell balance per rack and charging that deviates: C-rate, round trip, SoC.
  3. 03The same chain as for PV: alarm, fault, work order.

Ask Alpha AI

“Which battery alarms are open right now?”

What you get

  • Safety rules
  • Cell balance and charging
  • The same chain to the work order
See battery storage →
2.5

BESS monthly report

Every month the battery's key figures: energy, cycles, efficiency, SoH and availability.

A battery's KPI overview for the monthly report in Alpha

Sample data

How it works

  1. 01Charged and discharged energy, equivalent full cycles.
  2. 02Round-trip efficiency, average state of charge, SoH, availability and data quality.
  3. 03As a PDF in the customer's branding, and as Excel.

Ask Alpha AI

“What was the availability of BESS South in October?”

What you get

  • KPI overview per month
  • Branded PDF
  • Excel
See battery storage →

03 — Operations

An alarm becomes a work order, and every month the proof.

Work orders, contracts, planning and sales in one system with the monitoring, from the first alarm to the report the customer receives.

See Operations →
3.1

Work orders

From alarm to work order in one click, and the technician closes it on the phone.

Work order WB-2287 in Alpha with the technician app on a phone

Sample data

How it works

  1. 01Faults per site by priority; one click makes a service request, then a work order.
  2. 02The job, its status steps and the safety notes in the technician app.
  3. 03Hours and a signature go in; the customer receives the field report as a PDF.

Ask Alpha AI

“Which work orders are open for North park?”

What you get

  • Alarm to work order
  • Technician app
  • Field report as PDF
See Operations →
3.2

Contracts

Service agreements per installation, from proposal to active contract with SLA and planned maintenance.

The service agreements per installation in Alpha, with SLA compliance on top

Sample data

How it works

  1. 01Package, yearly fee and term per installation.
  2. 02The SLA deadlines of every fault come from the contract.
  3. 03Notice period, amendments and signing in the same file.

Ask Alpha AI

“Which contracts end within 90 days?”

What you get

  • Contract per installation
  • SLA from the contract
  • Term and notice period
See Operations →
3.3

Planning

Work orders wait in the queue until you plan them, with each technician's hours and certificates in view.

The planning board with work orders per technician in Alpha

Sample data

How it works

  1. 01Queue and week board per technician.
  2. 02Hours and certificates per technician in view while planning.
  3. 03The technician sees the day in the app.

Ask Alpha AI

“Who still has room on Wednesday for North park?”

What you get

  • Queue
  • Week board per technician
  • Certificates in view
See Operations →
3.4

Sales

From request to signed contract: pipeline, quotes and follow-up.

The sales pipeline in Alpha with the yearly value per stage

Sample data

How it works

  1. 01Stages from request to sent, with the yearly value per stage.
  2. 02Quotes with lines and costs, sent from the system.
  3. 03Follow-up: what has stood still too long rises to the top.

Ask Alpha AI

“Which requests have stood still for more than three weeks?”

What you get

  • Pipeline on yearly value
  • Quotes
  • Follow-up
See Operations →
3.5

Proof in euros

The monthly report shows what was found, how fast it was fixed, and what it cost and saved.

Published monthly reports in Alpha with faults, loss and avoided loss

Sample data

How it works

  1. 01Faults, loss and avoided loss, measured against your own goals.
  2. 02Time to acknowledge, time to resolve and SLA per customer.
  3. 03Every month a fixed version, per site and per customer, in MWh and in euros.

Ask Alpha AI

“What did Alpha save for Delta Solar in October?”

What you get

  • Found, resolved, saved
  • Repair time and SLA
  • Monthly report as PDF
See Operations →

Understand

Solar, storage and grid in one view.

Alpha follows the power through a site: what the panels produce, what the battery takes in and what goes to the grid. When the balance is off, you see it at once.

Solar PV

4.4MW

Producing · Last hour

Battery

52%

Charging1.2 MW

Grid

3.2MW

Exporting · Last hour

Alpha AIBalance checks out: production 4.4 MW = charging 1.2 MW + export 3.2 MW

How to start

Three steps to your own data in Alpha.

  1. 01

    You send the form

    Tell us what you run.

  2. 02

    We connect a few sites

    Within one working day you get a suggested time and a short list of what we need. Before the call, we connect a few of your sites.

  3. 03

    30 minutes on your own data

    No slides. We walk through your own sites, alarms and reports.

Questions

Before you start.

Security →
Does Alpha control my installations?

No. Alpha reads data and changes no settings, setpoints or dispatch without a separate instruction. AI features cannot control installations.

Which brands and protocols work?

Vendor clouds such as Huawei FusionSolar and SMA. Directly over Modbus TCP, SunSpec and Modbus RTU. Files over FTP, SFTP and S3, and push through webhooks.

Where is my data?

With OVHcloud in the EU, in a datacenter in Poland. Only for AI features and email does the information needed go to providers outside the EU.

Is my data used to train AI models?

No. Customer data is not used to train third-party models.

Who sees what?

Rights apply per organisation and per asset. Anything not explicitly allowed is denied.

What if data is missing?

You see it as missing, never as zero. A broken connection shows up at once.

See your own fleet in Alpha.

A 30-minute demo with your own data. Before the call, we connect a few of your sites.

Book a demo